One-Coat Moisture Control System For Concrete to Receive ARDEX Underlayments
The ARDEX MC RAPID MOISTURE CONTROL SYSTEM is a one-coat, 100% solids epoxy moisture management system formulated to suppress excessive moisture vapor emissions in new or existing concrete prior to installing an ARDEX underlayment with flooring. It is especially suited to treat areas of new concrete in critical installations, such as health care and institutional applications where the construction schedule does not allow adequate drying of the concrete. ARDEX MC RAPID is also recommended over existing concrete where the level of moisture emissions from the slab exceeds the maximum allowed by the manufacturer of the finished floor covering.
One-coat epoxy resin system
No sand broadcast required for underlayment applications of 1/4о (6 mm) or less
Ready to prime in just 4 hours
Solvent free, alkali resistant
Tenacious bond to substrate
Reduces vapor emissions to below maximum acceptable levels for floor coverings
For RH readings up to 100%
ASTM E96 perm rating .06
Use under all standard commercial and residential floor coverings on interior substrates only
Available in 22 lb. packaging
Click to access ARDEX MC Pre-Installation Checklist:
Last Updated about 6 years
