Yosemite™ Series / HP2 Metal Halide (T6)

Manufactured within GreenSource Initiative™ guidelines.

Metal and packaging components are made from recycled materials.

Manufactured using renewable solar energy, produced on site.

Returnable to manufacturer at end of life to ensure cradle-to-cradle handling.

Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.

Copper free aluminum extrusion with stainless steel hardware. Machined end caps are gasketed to create a water-tight seal for optical compartment. Design provides enclosed, water-proof wireway to maximize lamp life.

Patented 360HD™ Mounting System features a mechanical taper-lock, which allows a full 180° vertical adjustment without the use of serrated teeth, which inherently limit aiming. High temperature, silicone 'O' Ring provides water-tight seal and compressive resistance to maintain fixture position. Design withstands 73 lb. static load prior to movement to ensure decades of optical alignment. Ѕ”ќ pipe thread for mounting. Biaxial source control additionally provides 360° horizontal rotation in addition to vertical adjustment. ’Aim-And-Lock’ Technology allows precision adjustment without the redundant tightening and loosening of knuckle screw.LensShock resistant, tempered, clear glass lens is factory adhered to fixture body and provides hermetically sealed optical compartment.

For use with 70 watt maximum T6 metal halide lamp.

Select from three field interchangeable optic modules, Spot (SP), Flood (FL) or Wall Wash (WW).

Specification grade ceramic body lamp holder rated for 5kV starting pulse. G12 bi-pin base, nickel-plated contacts and stainless steel, heat resistant lamp retaining clips.

Cut-off visor (CV), cut-off snoot (CS) or adjustable barn doors (BD) for optimum lighting control. Accommodates up to [2] lens or louver media.

For use with remote, metal halide ballast. See ballast technical data to determine lamp-to-ballast distance and wiring requirements prior to detailing field installation of any remote wiring.

Teflon® coated wire, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.

Tamper-resistant, stainless steel hardware. Fixture hardware is keyed to maintain optical alignment during lamp service. 360HD™ Knuckle hardware is additionally black oxided.

Solid, 1/2" machined faceplate with (5) black oxided, captive, stainless steel mounting screws. Faceplate installs flush to grade. Specify fixture separately. Material to match fixture.

Corrosion-free composite, made from high strength, thermo-formed, sheet molded polyester compound. Glass reinforced, flame retardant and UV stabilized. (2) Bottom-Entry, 3/4" NPT female conduit entries with knockout plugs and (4) side flats for 1/2" or 3/4" conduit adapters.

Patented, corrosion-free composite flange projects into installation sub-strate to reinforce housing stability. Integral REBAR saddles simplify installation onto concrete form. (4) Orthogonal bosses permit use of 1/2" PVC conduit or EMT to simplify vertical position and leveling of housing. Pre-set self-tapping screws anchor housing at proper elevation.

IP-68 rated, vacuum sealed enclosure. Patented Anti-Condensation Valve (ACV™) eliminates condensation from ballast chamber. High temperature silicone 'O' Ring at faceplate. Patented HydroLock® technology provides fail safe water barrier between junction box and interior components. Anti-siphon valve (ASV™) prevents "wicking" through conductor insulation.

High power factor, integral, electronic ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz. H150E available in 120V, or 277V primary voltage. 50/60Hz. Integral, removable gear tray with quick disconnect and carrying handle.

Exclusive StarGuard® corrosion protection.

Choose from Eight (8) standard and 20 premium Class 'A' TGIC Polyester Powder Coat finishes, plus Four (4) hand-crafted metal finishes.

5 year limited warranty.

UL Listed. ITL tested to IESNA. Certified to CAN/CSA/ANSI Standards. Suitable for indoor or outdoor use. Suitable for use in wet locations. Suitable for installation within 4' of the ground. IP66 Rated. RoHs compliant.

Made in USA.