2-1/8" (54mm), 3-1/2" (87.9mm), or 5" (127mm) sightline
1-3/4" (44.5mm) depth
Non-thermal performance
Moderate to high traffic application
Tough yet attractive, the clean lines of Kawneer's Standard Entrances are designed as a single-source package of door, door frame and hardware that is easily adaptable to custom requirements.
Designed to complement new or remodel construction, modern or traditional architecture, they are engineered, constructed and tested to make good first impressions while withstanding the rigors of constant use by occupants and visitors.
The 190 Narrow Stile Entrance
Is engineered for moderate traffic in applications such as stores, offices and apartment buildings
Vertical stile measures 2-1/8" (54); top rail 2-1/4" (57.2) and bottom rail 3-7/8" (98.4)
Results in a slim look that meets virtually all construction requirements
The 350 Medium Stile Entrance
Provides extra strength for applications such as schools, institutions and other high traffic applications
Vertical stiles and top rails measure 3-1/2" (88.9)
Bottom rail measures 6-1/2" (165.1) for extra durability
The 500 Wide Stile Entrance
Creates a monumental visual statement for applications such as banks, libraries and public buildings
Vertical stiles and top rail are 5" (127); bottom rail measures 6-1/2" (165.1)
Results in superior strength for buildings experiencing heavy traffic conditions
General
Heights vary to 10 feet; widths range from approximately 3 to 4 feet
Door frame face widths range to a maximum of 4" (101.6), while depths range to 6" (152.4)
Door operation is single or doubleacting with maximum security locks or Touch Bar Panics standard
Architect's Classic one inch round, bent bar push/pull hardware is available in various finishes and sizes
Infills range from under 1/4 (6.4) to more than 1" (25.4)
Environmental Features
Recycled Content (pre/post mixed): average 50%
Recyclable: Yes
Reduces Solar Heat Gain: Yes
Contribures to daylighting: Yes
U-Value: 0.66
Solar Heat Gain Coefficient: 0.18
Visable Transmittance: 0.41
Environmental Product Declaration (EPD) Type III Product Specific: Yes
U-Factor, SHGC, VT and STC values are calculated using commercially available high performance glass. Please consult the glass manufacturer for actual values for your project.
Recycled content used is an average. Recycled content may range from 25-100%.
Last Updated over 7 years
