Primula was born of designer Knud Holscher's vision of creating an outdoor lighting series based on effective, non-glaring illumination that optimises the light from its source. Primula does this through a combination of optical elements that also utilises stray light. A lighted Primula has a unique identity, as the white rings appear to be suspended in air. Primula is also available as a 50 cm bollard and as a wall fixture.
All versions are available in a consumer version using a low voltage halogen light source.
Design by Knud Holscher
Knud Holscher developed the principles behind Primula in collaboration with the engineering firm, Hansen & Henneberg. The basic component is a symmetrical reflector that transmits light from the source directly to the top reflector, which ensures an effective distribution. The other optical element is white reflecting rings which utilise the light that does not hit the reflector. The stray light is collected and used by the white rings without affecting the lamp's efficiency, which is 49%. Primula B2 Professional is also available with hatch in base.
Surface:
Grey powder lacquer (RAL 7022)
Material:
Base: Extruded aluminium, powder lacquered.
Shade: Impact-resistant clear polycarbonate, aluminium powder lacquered.
Reflecting rings: Aluminium lacquered. In-ground spike: Warm galvanized steel
Installation:
The luminaire consists of three parts: Fixture head, base and spike. The base is to be fastened to an adjustable installation hardware, which is to be fastened to the spike. Ballast: 35W, positioned in box in base. Looping: Yes.
Light source:
G8,5 35W HCI-TC
Max. light source measurement:
Length: 81 mm, diameter 15 mm
Weight:
9 kg
Class:
IP65, F , Class of insulation II. Vandal-proof: Class II
Certifications:
CE
G8,5 35W HCI-TC
Last Updated about 6 years
