Type B stair treads are the most popular and cost effective stair treads offered by McNICHOLS®. These stair treads are typically offered in a welded construction and are made with a checkered plate nosing that is welded to the leading edge of the tread.
Stock List: Select a Material
Can't find what you want?
Product Information
Type B Stair Treads are fabricated from stock panels. Type B stair treads are available in a variety of bar heights: 1 inch, 1-1/4 inch, 1-1/2 inch, 1-3/4 inch, 2 inch, and 2-1/2 inch. The bearing bars are made with a variety of thicknesses, materials, and spacings. Type B stair treads are typically made in a welded construction; however, a press locked construction is also available.
End Plates
End plates are welded to the ends of the stair tread. The diagram below shows the end view of an end plate and its dimensions.
End View of End Plate
Explanation of Dimension ?A?, ?B?, and ?C?
The ?A? dimension in the illustration above varies according to the width of the stair tread. See the ?A? Dimension Table below for exact measurements.
RECTANGULAR BAR
Width of Tread
(Inches)
?A?
(Inches)
2?1/2
6?3/16
2?1/2
7?3/8
4?1/2
8?9/16
4?1/2
9?3/4
10?15/16
12?1/8
The ?B? and ?C? dimensions in the illustration above vary according to the material that the end plate is made from. See the ?B? and ?C? Dimension Table below for exact measurements.
Both RECTANGULAR and I-BAR
Material
?B?
(Inches)
(Inches)
Steel
1?3/4
2?1/2
Aluminum
2?1/4