K2 Series™ / HP2 Metal Halide (PAR38)

Manufactured within GreenSource Initiative™ guidelines.
Metal and packaging components are made from recycled materials.
Manufactured using renewable solar energy, produced on site.
Returnable to manufacturer at end of life to ensure cradle-to-cradle handling.
Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.
Furnished in Copper-Free Aluminum (Type 6061-T6).
Fully machined unibody design provides enclosed, water-proof wireway and integral heat sink for maximum component life. Integral knuckle for maximum mechanical strength. High temperature, silicone 'O' Ring provides water-tight seal.
Patented 360HD™ Mounting System features a mechanical taper-lock, which allows a full 180° vertical adjustment without the use of serrated teeth, which inherently limit aiming. High temperature, silicone 'O' Ring provides water-tight seal and compressive resistance to maintain fixture position. Design withstands 73 lb. static load prior to movement to ensure decades of optical alignment. Ѕ” pipe thread for mounting. Biaxial source control additionally provides 360° horizontal rotation in addition to vertical adjustment. ’Aim-And-Lock’ Technology allows precision adjustment without the redundant tightening and loosening of knuckle screw.
Fully machined cap accommodates [2] lens or louver media. Choose from 45° cutoff ( 'A' or 'D'), 1” deep bezel with 90° cutoff ( 'B' or 'e') or flush lens ( 'C') cap styles. 'A' and 'B' caps include weep-hole for water and debris drainage. 'D' and 'e' caps exclude weep-hole and are for interior use only.
Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.
For use with 150 watt maximum, Par38 metal halide lamp.
Patented Anti-Condensation Valve (ACV™) vacuum seals optical chamber and eliminates internal condensation. Spring loaded exterior mounted ACV™ button facilitates removal of vacuum sealed cap for lamp service. System re-initiates vacuum seal through normal fixture operation.
For use with remote metal halide ballast. See ballast technical data to determine lamp-to-ballast distance and wiring requirements prior to detailing field installation of any remote wiring.
Specification grade ceramic body lamp holder rated for 4kV starting pulse. Medium base, nickel-plated copper alloy lamp grip and screw shell. Corrosion resistant coil spring under center contact.
Teflon® coated wire, 18AWG, 600V, 250° C rated and certified to UL 1659 standard. Leads extended 6” beyond knuckle.
Tamper-resistant, stainless steel hardware. 360HD™ hardware is additionally black oxide treated for additional corrosion resistance.
StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class 'A' TGIC polyester powder coating.
5 year limited warranty.
UL Listed. ITL tested to IESNA. Certified to CAN/CSA/ANSI Standards. Suitable for indoor or outdoor use. Suitable for use in wet locations. Suitable for installation within 4' of the ground. IP66 Rated. RoHs compliant.
Made in USA.