Catskill Series™ Solid State (BKSSL®) Power of 'X'

Manufactured within GreenSource Initiative™ guidelines.
Made from recycled materials.
Processed using renewable solar energy generated on-site at our Madera, CA facility.
Returnable at end of life to ensure cradle-to-cradle handling.
Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.
Furnished in copper-free aluminum (Type 6061-T6).
Fully machined from solid billet.
Unibody design provides enclosed, water-proof wireway and integral heat sink for maximum component life.
Integral knuckle for maximum mechanical strength.
High temperature, silicone 'O' Ring provides water-tight seal.
Fully machined cap accommodates two (2) lens or louver media.
Specify Clear Lens (#9) Spread Lens (#10), Soft Focus Lens (#12), Rectilinear Lens (#13) or Honeycomb Baffle (#11).
Available in five (5) cap styles - 'A' & 'D' (45° cutoff), 'B' & 'E' (1” deep bezel with 90° cutoff), 'C' (flush lens). 'A' and 'B' caps include weep-hole for water and debris drainage. 'D' and 'e' caps exclude weep-hole and are for interior use only.
Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.
Interchangeable OPTIKIT™ modules (Spot, Flood and Wide Flood) permit field changes to optical distribution.
Integrated BKSSL® solid-state system with ‘x’ technology is scalable for field upgrade.
12 watt, 20 watt or 27 watt LED 'X' module.
Available in three (3) color temperatures - 2700K, 3000K or 4000K white light.
Modular design with electrical quick disconnects permit field maintenance.
LM-80 certified.
Minimum 50,000 hour rated life at 70% of initial lumens (L70).
Exact color point conformity exceeds ANSI C78.377 standard.
Provides uniform beam with no color variation over angle.
Module exceeds 80 CRI (RA>80, R9>16).
For use with remote LED driver. See driver technical data to determine remote distance and wiring requirements prior to detailing field installation of any remote wiring.
5” dia., machined canopy with stainless steel universal mounting ring permits mounting to 4” octagonal junction box (by others).
Wiring Teflon® coated, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.
Tamper-resistant, stainless steel hardware.
Canopy mounting screws are additionally black oxide treated for corrosion resistance.
Exclusive StarGuard® corrosion protection.
Choose from eight (8) standard and 20 premium Class 'A' TGIC Polyester Powder Coat finishes.
UL Listed. ITL tested to IESNA LM-79. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations.
Five (5) year limited warranty.
RoHS compliant.
Made in USA.