3-1/2" (88.9mm) sightline
1-3/4" (44.5mm) depth
Non-thermal performance
Blast mitigation, hurricane resistance
Moderate to high traffic application
Entrances provide extra strength for schools, institutions and other high traffic applications where codes require windborne debris protection or blast mitigation protection
Features
350 IR medium stile has 3-1/2" (88.9) vertical stiles, 3-1/2" (88.9) top and 6-1/2" (165.1) bottom rails
Door is 1-3/4" (44.5) deep
Welded corner construction (16 welds per door)
Single acting
Offset pivots, butt hinges or continuous geared hinge
Surface mounted or concealed closers
MS locks, 3-point locks or exit device hardware
Architects Classic push/pulls
Square stops with an interior silicone seal for 9/16" (14.3) glazing infill
Adjustable astragal utilizing pile weathering with polymeric fin at meeting stiles
Adjustable bottom rail sweep with EPDM blade
Bulb polymeric weatherstripping in door frames
Permanodic® anodized finishes in 7 choices
Painted finishes in standard and custom choices
Optional Features
Numerous push/pull finishes
Paneline® / Paneline® EL exit device (Hurricane Resistant applications only)
Horizontal Cross Rails
Square stops with 3M® VHB interior tape for 9/16" (14.3) glazing infill
Product Applications
350 IR medium stile provides extra strength for schools, institutions and other high traffic applications where codes require windborne debris protection or blast mitigation protection
Environmental Features
Recycled Content (pre/post mixed): average 50%
Recyclable: Yes
Reduces Solar Heat Gain: Yes
Contribures to daylighting: Yes
Environmental Product Declaration (EPD) Type III Product Specific: Yes
U-Factor, SHGC, VT and STC values are calculated using commercially available high performance glass. Please consult the glass manufacturer for actual values for your project.
Recycled content used is an average. Recycled content may range from 25-100%.
Last Updated about 9 years
