Acousti-Mat 3

Product Description:
Acousti-Mat® 3 is the sound deadening solution for floor systems that have been impossible to control! Now you can put an end to those "noise" complaints - even with open beam, concrete slab and conventional wood frame systems.
Acousti-Mat 3 consists of a nylon core of fused, entangled filaments attached to a non-woven fabric, similar to Maxxon's Acousti-Mat II, only three times thicker. It's a proven fact that the larger the air space, the greater the sound control - and this system creates the largest air void of any sound control mat. Acousti-Mat 3 increases IIC levels up to 17 points over wood frame, and up to 25 rating points (or more) over concrete. It also increases the STC rating 6-15 points over a bare wood frame system.
Acousti-Mat 3 is now always "Green" with 40% pre-consumer recycled content. It also has water resistant fabric.

Technical Data:
Material Composition: Nylon
Thickness, nominal: 0.8" (20.3 mm)
Density: 2.66 pcf (42.6 kg/m³)
Acousti-Mat 3 Color: black with white fabric
· water resistant fabric
Flammability ASTM E-84 Fuel Contribution: 0
Smoke density: NFPA Class A
Flame Spread: NFPA Class A
Deflection:
Pressure
50 psf (244 kg/m²)
100 psf (488 kg/m²)
200 psf (976 kg/m²)
300 psf (1464 Kg/m²) Deflection
0.05" (1.27 mm)
0.08" (2.03 mm)
0.15" (3.81 mm)
0.21" (5.33 mm)
Underlayment Depth: 1 1/2" (38 mm) plus wire mesh
Underlayment Depth with Maxxon CSM: 1 1/2" (38 mm)

'Green' Information:
Sample USGBC LEED Credit Areas*
Project Credit Category How Requirement is Fulfilled
Indoor Environmental Quality LEED for Schools
EQ Prerequisite 3 Minimum Acoustical
Performance Required Sound tests available based on
various floor/ceiling assemblies
LEED for Schools EQ 9 Enhanced Acoustical Performance Sound tests available based on various floor/ceiling assemblies
Materials & Resources MR 4.1 - 4.2 Recycled Content Nylon, 40% Pre-Consumer
MR 5.1 Local/Reg. Materials Enka, NC 28728