Attachments
- EPS Warranty Information
- XPS Warranty Information
- Data Sheets
- EPS MSDS
- XPS MSDS
- ProGUARD® Guide Specification
- #101 Staggered Panel Layout
- #102 Typical Corner Detail
- #103 Wall Section with Detail
- #104 Window & Door Weather Seal Treatment
- #105 Concrete Panel Section with Textured Finish
- #106 Variety of Wall Finishes
- #107 Miscellaneous Details
- #108 Wall Section Joint Detail with Steel Studs
- Installation Guide
Supplier Info
Water Proof
WaterProof/Roofing/Lifts
WaterProof/Roofing/Lifts
Product Description
ProGUARD®* wall panels consist of a lightweight, impact-resistant concrete sheet laminated to a continuous layer of rigid insulation – providing a wall system that installs faster than conventional building techniques.
ProGUARD® Insulated Sheathing Panels also provide superior thermal protection with shiplapped edges that eliminate thermal breaks. All joints are sealed with acrylic waterproofing and fiberglass mesh, providing an airtight seal.
- No additional moisture wrap required
- Cuts with carbide-tipped circular saw
- No "itchy" fiberglass particles on workers
- Can be exposed to weather prior to applying finish coating
- Ready to receive finishes the same day of installation
- R-7.5 or R-10 available as standard items
- Synthetic stucco, stone, brick and other siding products can be directly applied to the ProGUARD® cement board exterior
- Approved finish manufacturers: Senergy, Finestone, Master Wall, TEC
- 3- to 10-year warranties available
- Installs easily and quickly — panels weigh approximately 48 lbs. each
- Shiplapped edges prevent thermal breaks on studs
- Insulation is on the outside of the steel studs, eliminating thermal shorts
*The ProGUARD® Concrete Insulated Sheathing Panel System consists of Util-A-Crete® from Fin Pan, Inc., and rigid extruded polystyrene insulating foam from the Dow® Chemical Company.
ProGUARD® Insulated Sheathing Panels also provide superior thermal protection with shiplapped edges that eliminate thermal breaks. All joints are sealed with acrylic waterproofing and fiberglass mesh, providing an airtight seal.
- No additional moisture wrap required
- Cuts with carbide-tipped circular saw
- No "itchy" fiberglass particles on workers
- Can be exposed to weather prior to applying finish coating
- Ready to receive finishes the same day of installation
- R-7.5 or R-10 available as standard items
- Synthetic stucco, stone, brick and other siding products can be directly applied to the ProGUARD® cement board exterior
- Approved finish manufacturers: Senergy, Finestone, Master Wall, TEC
- 3- to 10-year warranties available
- Installs easily and quickly — panels weigh approximately 48 lbs. each
- Shiplapped edges prevent thermal breaks on studs
- Insulation is on the outside of the steel studs, eliminating thermal shorts
*The ProGUARD® Concrete Insulated Sheathing Panel System consists of Util-A-Crete® from Fin Pan, Inc., and rigid extruded polystyrene insulating foam from the Dow® Chemical Company.
