TIE-HVR-195VB ANCHOR SYSTEM FOR RUBBLE STONE
Supplier Info
Patricia Hohmann
Hohmann & Barnard
Hohmann & Barnard
Product Description
DESCRIPTION:
For concrete or metal stud backup walls
In this anchor system, the L-shaped bracket is attached to the backup
The mason then places the vertical rod into the projecting oblong eyelet as shown (after inserting it into the hole of the flexible wire tie)
Rubble stone can then be tied easily to the backup using these flexible ties wherever the veneer mortar joint may lie.
Ideal for when horizontal mortar joints do not align, and a large amount of vertical adjustability is required.
DIMENSIONS/GAUGES:
L-shaped bracket is 12 gauge thick x 2-5/8" wide, available in leg lengths to accommodate from 0" through 3-1/2" insulation
Vertical Hook is available in 5/16" or 3/8" diameter. Specify when ordering. (Engineering calculations available on request.)
Flexible Wire Ties are standard 3/16" dia. x length to suit
AVAILABLE FINISHES:
Available hot dip galvanized or stainless steel.
For concrete or metal stud backup walls
In this anchor system, the L-shaped bracket is attached to the backup
The mason then places the vertical rod into the projecting oblong eyelet as shown (after inserting it into the hole of the flexible wire tie)
Rubble stone can then be tied easily to the backup using these flexible ties wherever the veneer mortar joint may lie.
Ideal for when horizontal mortar joints do not align, and a large amount of vertical adjustability is required.
DIMENSIONS/GAUGES:
L-shaped bracket is 12 gauge thick x 2-5/8" wide, available in leg lengths to accommodate from 0" through 3-1/2" insulation
Vertical Hook is available in 5/16" or 3/8" diameter. Specify when ordering. (Engineering calculations available on request.)
Flexible Wire Ties are standard 3/16" dia. x length to suit
AVAILABLE FINISHES:
Available hot dip galvanized or stainless steel.
