Supplier Info
Patricia Hohmann
Hohmann & Barnard
Hohmann & Barnard
Product Description
DESCRIPTION:
Textroflash? Green is a 40-mil thick composite membrane consisting of a proprietary clear adhesive laminated to a polyethylene sheet with
45% recycled content
. A silicone release liner prevents the material from sticking together in the roll and is easily removed for installation. Textroflash? Green rolls are 50-foot long and are available in widths of 12?, 16?, 18?, 24?, 36?, 48?, 54?, 60? and 72?.
It can be used in both Thru-Wall and Surface-Mounted applications.
Suitable for application to masonry, gypsum sheathing, concrete, steel and wood substrates.
NOTES:
A stainless steel
H&B Drip Plate
is required to effectively guide moisture to the exterior
A stainless steel H&B Termination Bar (
T1
or
T2
) must also be used for surface-mount applications
ADVANTAGES:
Innovative composite membrane contains 45% Recycled content
Possible LEED credits toward certification in categories of Energy & Atmosphere (EA), Materials & Resources (MR) and Indoor Environmental Quality (EQ)
Polyethylene sheet aids in preventing tears or post-installation damage
Self-adhering
Self-seals around fastener and veneer anchor penetrations
Easy to install, inspect and repair
INSTALLATION
Download Textroflash? Green Installation Instructions
PERFORMANCE DATA:
GRAB TENSILE
Warp 240 lb 1068 N
Weft 250 lb 1110 N
ASTM D5034-95
TONGUE TEAR
Warp 58 lb 258 N
Weft 60 lb 266 N
ASTM D2261-96
TRAPEZOIDAL TEAR
Warp 42 lb 186 N
Weft 45 lb 200 N
ASTM S4533-04
MULLEN BURST
500 psi 3449 kPa
ASTM D3786-01
ACCELERATED UV WEATHERING
1
>90 % strength retention after 2000 hrs exposure @ 0.77 W/m²/nm, or 1200 hrs exposure @ 1.35 W/m²/nm
ASTM G151-00
ASTM G154-04
1
Q.U.V. [A-340 Lamps]: 8 hrs UV @ 60
o
C; 4 hrs condensation @ 50
o
C
LIMITATIONS:
Some substrates may require prep with Textroflash? Green primer or Flex-Flash® adhesive spray.
Do not apply Flex-Flash® adhesive spray or Textroflash? Green to damp, frosty, or contaminated surfaces
Cover within 90 days of installation. (Not intended for longer exposure to weather and UV.)
Ambient temperature where installed shall not exceed 150°F
For best installation install at temperatures above 32°F.
FLEX-FLASH® ADHESIVE SPRAY WARNINGS AND HAZARDS (
Equivalent to 17.4 Fluid Ounces)
Flex-Flash® adhesive spray contains Acetone and Hexane. Extremely Flammable. Use with adequate ventilation. Keep away from heat, sparks, open flame or other ignition sources. Harmful or fatal if swallowed. Do not take internally. If swallowed do not induce vomiting. Contact a physician immediately. Vapor harmful. Avoid inhalation of spray mist or vapors. If overcome, move patient to fresh air. Call a physician immediately. Eye irritant. Avoid contact with eyes and skin. In case of eye contact, flush immediately with water and continue for 15 minutes. If irritation persists, see a physician. For skin contact, wash with soap and water. If irritation persists, call a physician immediately. Contents under pressure. Do not puncture or incinerate container. Do not store at temperatures above 120°F. KEEP OUT OF REACH OF CHILDREN.
CAS NUMBERS: Isobutane/Propane Blend 75-28-5/74-98-6; Acetone 67-64-1; Glycerine Ester of Resin 25038-32-8; Hexane 110-54-3; Block Copolymer 25038-32-8.
Equivalent to 17.4 Fluid Ounces.
VOC INFORMATION: California ARB Consumer Products Category: Web Spray Adhesive. VOC Standard = 55.0%. VOC Content = 54.9%. This product complies with current applicable CARB standard.
STORAGE
Store flashing materials inside at a temperature between
60° F. (15.5° C.) and 80° F. (26.6° C.)
If exposed to lower temperatures, restore materials to 60° F. (15.5° C.) minimum temperature before application. Flex-Flash® should be applied when the air temperature is 32° or higher.
*Note: Hohmann & Barnard, Inc. is not responsible for incompatibility resulting from the use of non-H&B mastic and/or recommended primers and sealants.
Textroflash? Green is a 40-mil thick composite membrane consisting of a proprietary clear adhesive laminated to a polyethylene sheet with
45% recycled content
. A silicone release liner prevents the material from sticking together in the roll and is easily removed for installation. Textroflash? Green rolls are 50-foot long and are available in widths of 12?, 16?, 18?, 24?, 36?, 48?, 54?, 60? and 72?.
It can be used in both Thru-Wall and Surface-Mounted applications.
Suitable for application to masonry, gypsum sheathing, concrete, steel and wood substrates.
NOTES:
A stainless steel
H&B Drip Plate
is required to effectively guide moisture to the exterior
A stainless steel H&B Termination Bar (
T1
or
T2
) must also be used for surface-mount applications
ADVANTAGES:
Innovative composite membrane contains 45% Recycled content
Possible LEED credits toward certification in categories of Energy & Atmosphere (EA), Materials & Resources (MR) and Indoor Environmental Quality (EQ)
Polyethylene sheet aids in preventing tears or post-installation damage
Self-adhering
Self-seals around fastener and veneer anchor penetrations
Easy to install, inspect and repair
INSTALLATION
Download Textroflash? Green Installation Instructions
PERFORMANCE DATA:
GRAB TENSILE
Warp 240 lb 1068 N
Weft 250 lb 1110 N
ASTM D5034-95
TONGUE TEAR
Warp 58 lb 258 N
Weft 60 lb 266 N
ASTM D2261-96
TRAPEZOIDAL TEAR
Warp 42 lb 186 N
Weft 45 lb 200 N
ASTM S4533-04
MULLEN BURST
500 psi 3449 kPa
ASTM D3786-01
ACCELERATED UV WEATHERING
1
>90 % strength retention after 2000 hrs exposure @ 0.77 W/m²/nm, or 1200 hrs exposure @ 1.35 W/m²/nm
ASTM G151-00
ASTM G154-04
1
Q.U.V. [A-340 Lamps]: 8 hrs UV @ 60
o
C; 4 hrs condensation @ 50
o
C
LIMITATIONS:
Some substrates may require prep with Textroflash? Green primer or Flex-Flash® adhesive spray.
Do not apply Flex-Flash® adhesive spray or Textroflash? Green to damp, frosty, or contaminated surfaces
Cover within 90 days of installation. (Not intended for longer exposure to weather and UV.)
Ambient temperature where installed shall not exceed 150°F
For best installation install at temperatures above 32°F.
FLEX-FLASH® ADHESIVE SPRAY WARNINGS AND HAZARDS (
Equivalent to 17.4 Fluid Ounces)
Flex-Flash® adhesive spray contains Acetone and Hexane. Extremely Flammable. Use with adequate ventilation. Keep away from heat, sparks, open flame or other ignition sources. Harmful or fatal if swallowed. Do not take internally. If swallowed do not induce vomiting. Contact a physician immediately. Vapor harmful. Avoid inhalation of spray mist or vapors. If overcome, move patient to fresh air. Call a physician immediately. Eye irritant. Avoid contact with eyes and skin. In case of eye contact, flush immediately with water and continue for 15 minutes. If irritation persists, see a physician. For skin contact, wash with soap and water. If irritation persists, call a physician immediately. Contents under pressure. Do not puncture or incinerate container. Do not store at temperatures above 120°F. KEEP OUT OF REACH OF CHILDREN.
CAS NUMBERS: Isobutane/Propane Blend 75-28-5/74-98-6; Acetone 67-64-1; Glycerine Ester of Resin 25038-32-8; Hexane 110-54-3; Block Copolymer 25038-32-8.
Equivalent to 17.4 Fluid Ounces.
VOC INFORMATION: California ARB Consumer Products Category: Web Spray Adhesive. VOC Standard = 55.0%. VOC Content = 54.9%. This product complies with current applicable CARB standard.
STORAGE
Store flashing materials inside at a temperature between
60° F. (15.5° C.) and 80° F. (26.6° C.)
If exposed to lower temperatures, restore materials to 60° F. (15.5° C.) minimum temperature before application. Flex-Flash® should be applied when the air temperature is 32° or higher.
*Note: Hohmann & Barnard, Inc. is not responsible for incompatibility resulting from the use of non-H&B mastic and/or recommended primers and sealants.
