FLEX-FLASH? Drip Edge

• FLEX-FLASH? Membrane

DESCRIPTION:
H&B?s Flex-Flash® Drip Edge is a 3" wide by 60-mil thick product formulated with Elvaloy® Kee*.
Available in colors to match mortar and / or brick (see list below). Special colors availble upon request.
Extremely tough, with excellent impact and tear resistance
Flexibility is maintained in all weather environments, even in extreme heat or cold
Highly resistant to oils and repels most chemicals
Not susceptible to UV degradation
Compatible with most silicone and urethane sealants.
* Elvaloy is a registered trademark of the DuPont Company.
NOTE:
Patents Pending
Available colors:
Flex Flash® Drip Edge Performance Data
Tear Strength
ASTM D-751, A
Machine Direction
100.44 (lbf)
Cross Machine Direction
87.10 (lbf)
Tear Strength at Break
ASTM D-751, A
Machine Direction
337.25 (lbf)
Cross Machine Direction
323.10 (lbf)
Elongation at Break
ASTM D-751, A
Machine Direction
34.49%
Cross Machine Direction
26.51%
Seam Strength
ASTM D-751
370.88 (lbf)
Puncture Resistance
ASTM D-751
73.22 (lbf)
Heat Aging of Membrane
Break Strength at Break
N/A
Elongation at Break
N/A
Dimensional Stability
ASTM D-1204 (for 6 hrs. @ 176)
N/A
Water Absorption
ASTM D-570 (for 48 hrs. @ 70)
N/A
Sealant Compatibility
Company
Product
Primer Required
Urethanes
SIKA
Sikaflex-1A
#260-205
Sonneborn
Sonolastic NP1
#733
Tremco
Dymonic
#6 or #17
Silicones
Dow Corning
790 & 791
1200 Prime Coat
795 (Dark colors only)
1205 Prime Coat
GE Silicones
Silpruf®
SS4179
Pecora
890 & 895
P-120
Tremco
Spectrem 2
#10