Attachments
Supplier Info
Patricia Hohmann
Hohmann & Barnard
Hohmann & Barnard
Product Description
DESCRIPTION:
DP
Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform appearance.
Standard DP Drip Plates are compatible with all H&B flashing products.
DP-LB
Same as above, for lip brick conditions.
FTS
Optional Foam-Tite Seal? offers unique added protection against the ingress of water in cavity wall construction.
It is a continuous 1/8? strip of factory-installed compressible foam to act as a bond-break and help prevent air and moisture infiltration.
FTS-LB
Same as above, for lip brick conditions.
FTSA
Adds our optional Flash-Adhere? Adhesive Strip (
see note
) to the FTS Drip Plate (as described above). This adhesive strip (with tear-off release paper) is factory-installed on the top side of the drip plate to aid in the precise and permanent placement of the flashing.
FTSA-LB
Same as above, for lip brick conditions.
Drip Plate Corners
Drip Plate Inside and Outside Corners are pre-formed pieces with a smooth, uninterrupted, hemmed drip edge to maintain the integrity of the flashing system.
Available with Foam-Tite Seal? and /or Flash-Adhere? Adhesive strip (
see note
).
For corner pieces, reference ?inside? or ?outside? with above product numbers.
larger image
DIMENSIONS/GAUGES:
Available 1-1/2? or 3? wide (other widths available on request).
AVAILABLE FINISHES:
Fabricated from Type 304 or Type 316 Stainless Steel.
Also available in copper and lead-coated copper.
NOTE:
U.S. Pat. No. 6,584,746 Other Patents Pending
H&B sources Stainless Steel from a wide variety of vendors. Per the International Stainless SteelForum, Stainless Steel objects have an average of 60% recycled content.
Flash-Adhere? Adhesive Strip is ONLY suitable for use with
Flex-Flash®
or
Copper-Flex?
Flashings.
Foam-Tite™ Seal is compatible with ALL types of flashing.
DP
Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform appearance.
Standard DP Drip Plates are compatible with all H&B flashing products.
DP-LB
Same as above, for lip brick conditions.
FTS
Optional Foam-Tite Seal? offers unique added protection against the ingress of water in cavity wall construction.
It is a continuous 1/8? strip of factory-installed compressible foam to act as a bond-break and help prevent air and moisture infiltration.
FTS-LB
Same as above, for lip brick conditions.
FTSA
Adds our optional Flash-Adhere? Adhesive Strip (
see note
) to the FTS Drip Plate (as described above). This adhesive strip (with tear-off release paper) is factory-installed on the top side of the drip plate to aid in the precise and permanent placement of the flashing.
FTSA-LB
Same as above, for lip brick conditions.
Drip Plate Corners
Drip Plate Inside and Outside Corners are pre-formed pieces with a smooth, uninterrupted, hemmed drip edge to maintain the integrity of the flashing system.
Available with Foam-Tite Seal? and /or Flash-Adhere? Adhesive strip (
see note
).
For corner pieces, reference ?inside? or ?outside? with above product numbers.
larger image
DIMENSIONS/GAUGES:
Available 1-1/2? or 3? wide (other widths available on request).
AVAILABLE FINISHES:
Fabricated from Type 304 or Type 316 Stainless Steel.
Also available in copper and lead-coated copper.
NOTE:
U.S. Pat. No. 6,584,746 Other Patents Pending
H&B sources Stainless Steel from a wide variety of vendors. Per the International Stainless SteelForum, Stainless Steel objects have an average of 60% recycled content.
Flash-Adhere? Adhesive Strip is ONLY suitable for use with
Flex-Flash®
or
Copper-Flex?
Flashings.
Foam-Tite™ Seal is compatible with ALL types of flashing.
