#220 Ladder Mesh Reinforcement
Supplier Info
Patricia Hohmann
Hohmann & Barnard
Hohmann & Barnard
Product Description
DESCRIPTION:
Cross rods are spaced so block cells are not obstructed, allowing easy placement of vertical rebars
A full 8" splice between lengths of ladder is facilitated
Hohmann & Barnard?s Lox-All® Ladder-Mesh are continuous lengths of joint reinforcement that are embedded into the horizontal mortar joint of masonry walls
Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction
Benefits:
Greatly reduces cracking that can arise from thermal stresses. This enhances resistance to water penetration, as cracks are controlled.
Increases lateral flexural strength.
Bonds exterior and interior masonry wythes together in composite or cavity walls. Also bonds masonry at intersecting walls and corners
Increases elasticity and performance of masonry walls under various stresses
Features:
Butt-welding of cross rods to longitudinal rods (not more than 16?o.c.). This construction enhances bonding capabilities, eliminates projection of cross rods beyond the specified width of reinforcement, and prevents excessive build up of wire in limited mortar joints
Continuous deformation along each longitudinal rod for superior bonding performance
H&B products conform to ASTM A951 standard specification for masonry joint reinforcement
DIMENSIONS/GAUGES:
4? wall - 16? wall
Other widths available on special request
(S) Standard: 9 ga. side rods x 9 ga. cross rods
(EH) Extra Heavy: 3/16? side rods x 9 ga. cross rods
(SHD) Super Heavy Duty: 3/16? side rods x 3/16? cross rods
AVAILABLE FINISHES:
Finishes: Mill Galv, Hot Galv OR
Features: Stainless Steel
Cross rods are spaced so block cells are not obstructed, allowing easy placement of vertical rebars
A full 8" splice between lengths of ladder is facilitated
Hohmann & Barnard?s Lox-All® Ladder-Mesh are continuous lengths of joint reinforcement that are embedded into the horizontal mortar joint of masonry walls
Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction
Benefits:
Greatly reduces cracking that can arise from thermal stresses. This enhances resistance to water penetration, as cracks are controlled.
Increases lateral flexural strength.
Bonds exterior and interior masonry wythes together in composite or cavity walls. Also bonds masonry at intersecting walls and corners
Increases elasticity and performance of masonry walls under various stresses
Features:
Butt-welding of cross rods to longitudinal rods (not more than 16?o.c.). This construction enhances bonding capabilities, eliminates projection of cross rods beyond the specified width of reinforcement, and prevents excessive build up of wire in limited mortar joints
Continuous deformation along each longitudinal rod for superior bonding performance
H&B products conform to ASTM A951 standard specification for masonry joint reinforcement
DIMENSIONS/GAUGES:
4? wall - 16? wall
Other widths available on special request
(S) Standard: 9 ga. side rods x 9 ga. cross rods
(EH) Extra Heavy: 3/16? side rods x 9 ga. cross rods
(SHD) Super Heavy Duty: 3/16? side rods x 3/16? cross rods
AVAILABLE FINISHES:
Finishes: Mill Galv, Hot Galv OR
Features: Stainless Steel
