#180-BL Dub'l Loop-Lok? with Byna-Lok? Wire Tie
Supplier Info
Patricia Hohmann
Hohmann & Barnard
Hohmann & Barnard
Product Description
DESCRIPTION:
Hohmann & Barnard's Dub'l Loop-Lok Reinforcement improves upon other systems of adjustable masonry reinforcement
No other system offers all of the following features:
Allows in-plane vertical and horizontal movement of masonry wythes while restraining tension and compression.
Loops welded shut to maintain allowable tolerance and system integrity.
Unlike horizontal eyelets, vertical loops will not clog with mortar as construction progresses.
Loops extend one direction only to allow simple placement of insulation.
100% protection against separation of Wire Tie from reinforcement.
Also available with the Seismiclip® Interlock System (#180 S.I.S.), suitable for seismic zones.
Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcement).
Optional Feature!
Special loop with 2 ¼” vertical adjustability. Ideal for Econo or Utility Bricks. Request when ordering.
Byna-Lok™ Wire Tie
New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok Wire Tie. Various H&B Anchor systems can be fitted with the Byna-Lok Wire Tie, as shown, affording easy and secure insertion of the continuous joint reinforcing wire. Masonry veneer walls are then reinforced with continuous wire.
Swage & mild pitch on legs of the Byna-Lok Wire Tie provide an integral track for the continuous joint reinforcing wire. Suitable for standard 3/8" mortar joint
Enhanced Performance: The use of a continuous wire in masonry veneer walls is beneficial in providing additional protection against problems arising from thermal expansion and contraction. It also allows for a more uniform distribution of lateral forces.
Seismic Zone Conformance: This system conforms with the requirements of the Uniform Building Code for seismic zones. The code requires anchored veneer walls to have a continuous wire embedded in the mortar joint. The wire is secured to the tie anchor, which is fastened to the supporting structure.
More surface engagement of the continuous wire and the integral track than any other system on the market. Reduces potential for incorrect placement or disengagement of the continuous wire due to workmanship error.
Hassle-free installation of continuous wire into the Byna-Lok Wire Tie
Economical. Add continuous wire to masonry walls at little additional cost.
Suitable for use with a variety of H&B anchors.
Available in 3/16" diameter x 3", 4" or 5" long, Hot Dip Galvanized or Type 304 Stainless Steel.
System includes heavy-duty continuous wire.
GAUGES:
Reinforcing for interior wythe can be STANDARD WEIGHT (9 ga x 9 ga), EXTRA HEAVY (3/16" Side Rods x 9 ga Cross Rods), or SUPER HEAVY DUTY (all 3/16")
Eyes and Loops are 3/16" dia. standard
AVAILABLE FINISHES:
Hot Dip Galv./Stainless Steel
Hohmann & Barnard's Dub'l Loop-Lok Reinforcement improves upon other systems of adjustable masonry reinforcement
No other system offers all of the following features:
Allows in-plane vertical and horizontal movement of masonry wythes while restraining tension and compression.
Loops welded shut to maintain allowable tolerance and system integrity.
Unlike horizontal eyelets, vertical loops will not clog with mortar as construction progresses.
Loops extend one direction only to allow simple placement of insulation.
100% protection against separation of Wire Tie from reinforcement.
Also available with the Seismiclip® Interlock System (#180 S.I.S.), suitable for seismic zones.
Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcement).
Optional Feature!
Special loop with 2 ¼” vertical adjustability. Ideal for Econo or Utility Bricks. Request when ordering.
Byna-Lok™ Wire Tie
New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok Wire Tie. Various H&B Anchor systems can be fitted with the Byna-Lok Wire Tie, as shown, affording easy and secure insertion of the continuous joint reinforcing wire. Masonry veneer walls are then reinforced with continuous wire.
Swage & mild pitch on legs of the Byna-Lok Wire Tie provide an integral track for the continuous joint reinforcing wire. Suitable for standard 3/8" mortar joint
Enhanced Performance: The use of a continuous wire in masonry veneer walls is beneficial in providing additional protection against problems arising from thermal expansion and contraction. It also allows for a more uniform distribution of lateral forces.
Seismic Zone Conformance: This system conforms with the requirements of the Uniform Building Code for seismic zones. The code requires anchored veneer walls to have a continuous wire embedded in the mortar joint. The wire is secured to the tie anchor, which is fastened to the supporting structure.
More surface engagement of the continuous wire and the integral track than any other system on the market. Reduces potential for incorrect placement or disengagement of the continuous wire due to workmanship error.
Hassle-free installation of continuous wire into the Byna-Lok Wire Tie
Economical. Add continuous wire to masonry walls at little additional cost.
Suitable for use with a variety of H&B anchors.
Available in 3/16" diameter x 3", 4" or 5" long, Hot Dip Galvanized or Type 304 Stainless Steel.
System includes heavy-duty continuous wire.
GAUGES:
Reinforcing for interior wythe can be STANDARD WEIGHT (9 ga x 9 ga), EXTRA HEAVY (3/16" Side Rods x 9 ga Cross Rods), or SUPER HEAVY DUTY (all 3/16")
Eyes and Loops are 3/16" dia. standard
AVAILABLE FINISHES:
Hot Dip Galv./Stainless Steel
