Costumers, on Designer Pages

FIRM ACTIVITY

See how your firm has used products across past and active specifications. Connect with team members who’ve spec’d products you’re considering—and learn from within.

VENDORS

There are currently no vendors listed for this product.

Do you rep this brand?

If you represent this brand, you can register as a vendor and join our Vendor Hub — it’s completely free.

PRODUCT DETAILS

ATTACHMENTS

pdf |
literature

Manufacturer's Product Description

Materials:
All wood shall be thoroughly air and kiln dried to a moisture content not exceeding 7% at time of assembly. All exposed wood and veneers to be well sanded and free from discoloration, worm holes, pits and shakes. All exterior surface veneers to be knife cut 1/36” thick, Black Walnut or Oak stock. Veneers to be edge-glued with moisture resistant resin glue applied in hot plate presses. Veneers to be carefully matched for grain and color.

Parts:
Tops and end panels are 3-ply construction with a genuine Walnut or Oak veneer face on 45 lb. density flake board core with a veneer backer. The back panel is to be ¼” thick, 3-ply construction with Walnut veneer or Oak face, rotary core and sound hardwood back. Shelves are ¾” solid hardwood with a veneer front edge.

Construction:
To be full mortise and tenon between base piece, lower shelf, ends and top. Mortise and tenon joints to be reinforced by 1” #8 Phillips flat head screws. The base piece is glued and screwed to the ends and bottom shelf with 1 ¼” #8 Phillips flat head screws. The ¼” 3-ply back panel is to be fastened from the back side with 5/8” narrow crown staples located 4” apart and the back panel is to be recessed flush with the ends and top.

Finish:
Exposed wood surface to be finished a catalyzed varnish.