BD-75 Bed, on Designer Pages

THIS PRODUCT HAS BEEN DISCONTINUED. THE INFORMATION ON THIS PAGE MAY NO LONGER BE ACCURATE.

Auxiliary Furniture

Beds/Bed Frames

Add to Folder

| |

Download All Images

FIRM ACTIVITY

See how your firm has used products across past and active specifications. Connect with team members who’ve spec’d products you’re considering—and learn from within.

VENDORS

There are currently no vendors listed for this product.

Do you rep this brand?

If you represent this brand, you can register as a vendor and join our Vendor Hub — it’s completely free.

PRODUCT DETAILS

ATTACHMENTS

pdf |
tear sheet

Manufacturer's Product Description

BD-75 Bed
Complete Element:(includes headboard and platform)
King (Eastern), 85”w x 36”h or 42”h x 87”l
King (California), 81”w x 36”h or 42”h x 91”l
Queen, 69”w x 36”h or 42”h x 87”l
Full, 63”w x 36”h or 42”h x 82”l
Twin, 48”w x 36”h or 42”h x 82”l
Headboard Only (36” high or 42” high):
King (Eastern), 85"w x 36"h or 42”h x 3"d, 75 lbs.
King (Cal.), 81”w x 36”h or 42”h x 3”d, 75 lbs.
Queen, 69"w x 36"h or 42”h x 3"d, 75 lbs.
Full, 63"w x 36"h or 42”h x 3"d, 70 lbs.
Twin, 48"w x 36"h or 42”h x 3"d, 55 lbs.
Platform Only:
King (Eastern), 85"w x 89"l x 6”h, 75 lbs.
King (Cal.), 81”w x 93”l x 6”h, 75 lbs.
Queen, 69"w x 89"l x 6”h, 75 lbs.
Full, 63"w x 84"l x 6”h, 70 lbs.
Twin, 48"w x 84"l x 6”h, 55 lbs.
It is recommended to make the headboard 42”high if you intend to use a pillow-top mattress that is 14” - 15” high. Increasing the height of the headboard is more appropriate to the design than increasing the height of the platform in order to obtain a bed (top of mattress) which is approximately 20” off the ground.
Must specify: Height of headboard at either 36” or 42” With or without Cut-out in heaboard
The platform which supports the mattress is plywood with a rubber surface (to keep the mattress from sliding). The plywood platform is supported by the framing which extends beyond the mattress on three sides and is held up off the floor by steel legs. Also, the platform is on levelers to adjust to uneven floors.
BD-75 ships in five or six pieces (depending on size) and requires simple assembly on site (two bolts must be tightened into pre-drilled holes on all four corners of the bed and platform drops into the framing).