Recommended Grout Width:
1/8â?? (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)
Residential Floors, Walls/Backsplashes, Countertops, Exteriors
Suitable for residential exterior floors and walls (unpolished surface only) in freezing and non-freezing climates when proper installation methods are followed.
Special Care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a modified latex thin-set is recommended for installation. Not for use on ramps.
Note: Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim, and not from tile and trim samples and color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20â?? x 20â??, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
Suitable for commercial exterior walls in freezing and non-freezing climates when proper installation methods are followed.
Light polished wet areas/exterior floor use.
This product is available in linear sizes through our special order Linear Options program.
2" x 12" Decorative Accent
12" x 12" Field Tile
12" x 24" Field Tile
18" x 18" Field Tile
24" x 24" Field Tile
* Special consideration needs to be given when installing tiles 20" and larger. Please refer to www.daltileproducts.com/LargeTiles for additional information.
Linear Options Sizes
2" x 24"
4" x 24"
6" x 24"
Bullnose S-43C9 3" x 12"
Cove Base S-36C9T 6" x 12"
Cove Base Outcorner SC-36C9T 1" x 6"