DR2 Series Integral Transformer – Solid State (BKSSL®)

Manufactured within GreenSource Initiative™ guidelines.

Metal and packaging components are made from recycled materials.

Manufactured using renewable solar energy, produced on site.

Returnable to manufacturer at end of life to ensure cradle-to-cradle handling.

Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.

Corrosion-free composite, made from high strength, thermo-formed, sheet molded polyester compound. Glass reinforced, flame retardant and UV stabilized.

(2) Bottom-Entry, 3/4" NPT female conduit entries with knockout plugs and (4) side flats for 1/2" or 3/4" conduit adapters.

Corrosion-free patented Stability Flange projects into installation sub-strate to reinforce housing stability. Integral REBAR saddles simplify installation onto concrete form. (4) Orthogonal bosses permit use of 1/2" PCV conduit or EMT to simplify vertical position and leveling of housing. Pre-set self-tapping screws anchor housing at proper elevation.

Integrated solid state system with 'e' technology is scalable for field upgrade. Modular design with electrical quick disconnects permit field maintenance. High power, forward throw source complies with ANSI C78.377 binning requirements.

Exceeds ENERGY STAR® lumen maintenance requirements.

LM-80 certified components.

Integral, constant current driver. 12VAC/VDC input. 50/60Hz. Proprietary input control scheme achieves power factor correction and eliminates inrush current. Output, over-voltage, open-circuit, and short circuit protected.

For direct burial in soil or concrete.

Consult Drainage Installation Guide for In-Grade Fixtures (DIG-IT) for compliance with proper soil preparation and drainage requirements prior to installation.

Integral, electronic transformer. 105-300VAC primary voltage. 50/60Hz. Non Dimming. 20VA maximum load.

Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard.

Features OptiLock® and gear tray quick disconnects.

Patented HydroLock® with anti-siphon valve (ASV™) wireway. (3) Water-Tight connectors supplied for line connection. Maximum (2) #10 & (1) #18. Minimum (1) #12 & (1) #18.

Self Evacuating Airtight Lamp Module (S.E.A.L.™). IP-68 rated, vacuum sealed enclosure.

Patented Anti-Condensation Valve (ACV™) eliminates condensation from optical chamber. High temperature silicone 'O' Ring at faceplate.

Patented HydroLock® technology provides fail safe water barrier between junction box and interior components. Anti-siphon valve (ASV™) prevents ”њwicking" through conductor insulation.

High heat, shock resistant, 1/8" etched Pyrex® glass lens.

Suitable for walk-over and drive-over applications to 35,000 lbs.

Solid, 1-1/2" machined 6061T6 aluminum with (5) black oxide, captive, stainless steel mounting screws.

Faceplate options include solid, 1-1/2" machined brass and solid, 1-1/2" machined stainless steel.

StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class 'A' TGIC polyester powder coating.

Brass components are available in powder coat or handcrafted metal finish.

Stainless steel components are available in handcrafted metal finish. (Brushed finish for interior use only).

5 year limited warranty.

UL Listed. ITL tested to IESNA LM-79. Certified to CAN/CSA Standard. RoHs compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations. IP68 Rated.

Made in the USA.