Manufactured within GreenSource Initiative™ guidelines.
Metal and packaging components are made from recycled materials.
Manufactured using renewable solar energy, produced on site.
Returnable to manufacturer at end of life to ensure cradle-to-cradle handling.
Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.
Copper free aluminum extrusion with stainless steel hardware. Machined end caps are gasketed to create a water-tight seal for optical compartment. Design provides enclosed, water-proof wireway to maximize lamp life.
Patented 360HD™ Mounting System features a mechanical taper-lock, which allows a full 180° vertical adjustment without the use of serrated teeth, which inherently limit aiming. High temperature, silicone 'O' Ring provides water-tight seal and compressive resistance to maintain fixture position. Design withstands 73 lb. static load prior to movement to ensure decades of optical alignment. Ѕ”ќ pipe thread for mounting. Biaxial source control additionally provides 360° horizontal rotation in addition to vertical adjustment. ’Aim-And-Lock’ Technology allows precision adjustment without the redundant tightening and loosening of knuckle screw.LensShock resistant, tempered, clear glass lens is factory adhered to fixture body and provides hermetically sealed optical compartment.
For use with 70 watt maximum T6 metal halide lamp.
Select from three field interchangeable optic modules, Spot (SP), Flood (FL) or Wall Wash (WW).
Specification grade ceramic body lamp holder rated for 5kV starting pulse. G12 bi-pin base, nickel-plated contacts and stainless steel, heat resistant lamp retaining clips.
Cut-off visor (CV), cut-off snoot (CS) or adjustable barn doors (BD) for optimum lighting control. Accommodates up to [2] lens or louver media.
For use with remote, metal halide ballast. See ballast technical data to determine lamp-to-ballast distance and wiring requirements prior to detailing field installation of any remote wiring.
Teflon® coated wire, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.
Tamper-resistant, stainless steel hardware. Fixture hardware is keyed to maintain optical alignment during lamp service. 360HD™ Knuckle hardware is additionally black oxided.
Universal design accommodates a single metal halide fixture (specified separately) and permits water-tight installation in four distinct mounting conditions.
Tree Strap™ mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Stainless steel safety cable maintains UPM mounting when nylon strap is disengaged.
Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Specify offset or center fixture position. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 1/2" NPT female conduit entries per end cap for through wiring.
Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
[4] 3/4" NPT, machined aluminum knockouts. High temperature, silicone 'O' Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
[1] 20-150 watt, integral, high power factor, electronic metal halide ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz. H20E and H150E available in 120V, or 277V primary voltage. 50/60Hz.
Surface Mount for use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.
Round CamLock™ Canopy (Recessed Junction Box) 5" diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4" octagonal junction box. [2] tamper-resistant, black oxide stainless steel mounting screws. 1/8" thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock™ provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box.
Ground / Monument Installation for use at grade level with integration of Power Pipe™ System, which provides direct burial wireway into concrete or soil. 6" dia., molded stability flange projects into substrate to simplify installation and reinforce housing stability. [2] 1/2" PVC slip connectors for through wiring. Includes stainless steel mounting brackets for additional anchor to architectural surface. Anti-Siphon Valve (ASV™) prevents "wicking" through conductor insulation. [3] Silicone filled wire nuts supplied for water-tight line connection. Maximum (2) #10 & (1) #18. Minimum (1) #12 & (1) #18.
Exclusive StarGuard® corrosion protection.
Choose from Eight (8) standard and 20 premium Class 'A' TGIC Polyester Powder Coat finishes, plus Four (4) hand-crafted metal finishes.
5 year limited warranty.
UL Listed. ITL tested to IESNA. Certified to CAN/CSA/ANSI Standards. Suitable for indoor or outdoor use. Suitable for use in wet locations. Suitable for installation within 4' of the ground. IP66 Rated. RoHs compliant.
Made in USA.
Last Updated about 5 years
