Everest™ Series / PC Metal Halide (PAR20)

Manufactured within GreenSource Initiative™ guidelines.

Metal and packaging components are made from recycled materials.

Manufactured using renewable solar energy, produced on site.

Returnable to manufacturer at end of life to ensure cradle-to-cradle handling.

Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.

Furnished in Copper-Free Aluminum (Type 6061-T6).

Fully machined. Unibody design provides enclosed, water-proof wireway and integral heat sink for maximum component life. Integral knuckle for maximum mechanical strength. High temperature, silicone 'O' Ring provides water-tight seal.

The LOCK™ (Locking 'O' Ring Compression Knuckle) is comprised of two components. The first is integral to the body and features an interior, machined taper. The second is machined from solid billet and features a second, reverse angle taper. The resultant mechanical taper-lock allows a full 180° vertical adjustment without the use of serrated teeth, which inherently limit aiming. High temperature, silicone 'O' Ring provides water-tight seal and compressive resistance to maintain fixture position. Design withstands 73 lb. static load prior to movement to ensure decades of optical alignment. 1/2" pipe thread for mounting.

360SL™ Knuckle Mounting System additionally provides biaxial source control with 360° horizontal rotation in addition to vertical adjustment.

Fully machined cap. Accommodates [2] lens or louver media. Choose from 45° cutoff ( 'A' or 'D'), 1”ќ deep bezel with 90° cutoff ( 'B' or 'e') or flush lens ( 'C') cap styles. 'A' and 'B' caps include weep-hole for water and debris drainage. 'D' and 'e' caps exclude weep-hole and are for interior use only.

Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.

For use with 35 watt maximum, Par20 MH lamp.

For use with remote metal halide ballast. See ballast technical data to determine lamp-to-ballast distance and wiring requirements prior to detailing field installation of any remote wiring.

Specification grade ceramic body lamp holder rated for 4kV starting pulse. Medium base, nickel-plated copper alloy lamp grip and screw shell. Corrosion resistant coil spring under center contact.

Teflon® coated wire, 18AWG, 600V, 250° C rated and certified to UL 1659 standard. Leads extended 6”ќ beyond knuckle.

Tamper-resistant, stainless steel hardware. LOCK™ vertical aiming screw and 360SL™ hardware are additionally black oxide treated for additional corrosion resistance.

Universal design accommodates a single fixture (specified separately). Two wire entrance knockouts will accept 1/2" conduit or Romex connectors. Four 3/16" wall plate mounting holes. (Mounting hardware by others).

Canopy housing is fully machined from copper-free aluminum. Stainless steel hardware. Gasket provides seal between housing and canopy.

[1] 20 watt, integral, high power factor, electronic ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz. 50/60Hz. Also available in 120V, or 277V primary voltage. 50/60Hz.

StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class 'A' TGIC polyester powder coating.

5 year limited warranty.

UL Listed. ITL tested to IESNA. Certified to CAN/CSA/ANSI Standards. Suitable for indoor or outdoor use. Suitable for use in wet locations. Suitable for installation within 4' of the ground. IP66 Rated. RoHs compliant.

Made in USA.