Catskill Series™ / PM2 Metal Halide (PAR20)

Manufactured within GreenSource Initiative™ guidelines.

Metal and packaging components are made from recycled materials.

Manufactured using renewable solar energy, produced on site.

Returnable to manufacturer at end of life to ensure cradle-to-cradle handling.

Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.

Furnished in Copper-Free Aluminum (Type 6061-T6).

Body is fully machined from solid billet.

Unibody design provides enclosed, water-proof wireway and integral heat sink for maximum component life.

High temperature, silicone 'O' Ring provides water-tight seal.

Cap is fully machined with flush mounted lens. Accommodates up to (2) lens or louver media.

Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.

For use with 35 watt maximum, PAR20 metal halide lamp.

Specification grade ceramic body lamp holder rated for 4kV starting pulse. Medium base, nickel-plated copper alloy lamp grip and screw shell. Corrosion resistant coil spring under center contact.

Wiring is Teflon® coated, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.

Tamper-resistant, stainless steel hardware.

Ballast Housing (PM2™) surface mount for use with side entry, surface conduits.

Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.

Round CamLock™ Canopy (recessed junction box) 5" diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4" octagonal junction box.

[2] tamper-resistant, black oxide stainless steel mounting screws.

1/8" thick HT-805A silicone foam gasket for water-tight seal.

Integral CamLock™ provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation.

Integral wiper seal maintains water-tight integrity between UPM and junction box.

Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.

Rectangular CamLock™ Canopy (recessed junction box) is machined aluminum, 3" x 5" rectangular canopy for use with single gang junction box.

[2] tamper resistant, black oxide stainless steel mounting screws.

1/8" thick HT-805A silicone foam gasket for water-tight seal.

Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.

Housing is copper free, aluminum extrusion with die cast end caps.

Surface mounted with flow through back channel to prevent water and debris collection.

Machined aluminum cover with countersunk holes for flush hardware installation.

Tamper-resistant, captive, black oxide stainless steel mounting screws.

Front access for ease of installation and inspection.

[2] 1/2" NPT female conduit entries per end cap for through wiring.

Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.

[4] 1/2" NPT, machined aluminum patented knockouts.

High temperature, silicone 'O' Ring for water-tight seal.

Patented design allows knockout to be reinserted without compromising seal integrity.

Ballast[1] 35 watt, integral, high power factor, electronic metal halide ballast. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz. H35E available in 120V, or 277V primary voltage. 50/60Hz.

StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class 'A' TGIC polyester powder coating. Finish to match fixture.

5 year limited warranty.

UL Listed. ITL tested to IESNA. Certified to CAN/CSA/ANSI Standards. Suitable for indoor or outdoor use. Suitable for use in wet locations. IP66 Rated. RoHs compliant.

Made in USA.