CLC Series

Cove Lighting

Specifications
LED cove light system. The GRG (Glass fiber Reinforced
Gypsum) composite, cove casting is available in four
standard styles and is provided in 8-foot sections that
may be cut in the field. Inside and outside 90? corners
are available, contact factory for details. The lighting
component is complete with a formed reflector that is
matte white, TGIC polyester powder coated, integral
driver and LED modules. The 2ґ unit utilizes two or
four high efficacy, LED modules at 22 or 44 watts. The
3ґ utilizes three or six modules at 33 or 66 watts and
the 4ґ is available with four or eight modules at 44 or
88 watts. They utilize the Sylvania 3500K distributed
array, LED modules that are 80+ CRI and are rated
up to 60,000 hours. The asymmetric reflector
design distributes uniform light into the space while
minimizing socket shadowing. The integration of
the lighting component into the casting is designed
for fast, easy installation. All fixtures are supplied
standard with Luminaire Disconnect.
c/CSA/us Listed.

Options
LED Driver 120/277 0-10 volt, Osram OT Dim
(Standard)
For Alternate Dimming:
DM6 3-wire/Digital, Lutron ECO
Systems L3D
DM7 2-wire, Lutron LTE (120v only)
GRG Casting A, B, C, or D Style (Standard)
Custom Available
Lens Clear Lexan Full Lens -FL
Frosted Lexan Full Lens -FLF
Metal Finish White (Standard)
Anti-Microbial White -MB
LED Color 3500K (Standard)
3000K -30K
4000K -40K

Installation
NOTE: The casting should be installed by the
drywall contractor and the lighting system by
the electrical contractor.
1) Set level line on the wall for cove.
2) Mount casting to wall studs and secure joints.
3) Use standard drywall tape and joint compound at
the casting joints and edges that meet the structure.
4) Sand and finish like typical drywall seam.
5) Finish casting with interior wall.
6) Make electrical connections and secure the reflector
assembly to the casting.