Alloy #48002

Product Specs
Finished Pile Height: 0.257 inch | 6.5 mm
Finished Pile Height II: 0.117 inch | 3.0 mm
Manufacturing Tolerances: Bow - 1" per 12' width
/ Skew - 1" per 12' width
/ Edge Straightness - +/- 1/2" variation
/ Pattern Elongation - 1" per 10'length
Methenamine Pill: Meets CAN/CGSB-4.2 No.27.6/DOC FF 1-70
Tufted Pile Weight: 25 oz/sq yd | 848 g/sq m
Width: 12 feet | 366 cm
Pattern Scale: Medium
Pattern Type: Geometric
Collection: Synthesis Collection
Coordinating Group: Coordinate Group 6
Construction: Tufted Textured Loop
Primary Backing: Woven Polypropylene
Recycled Content: Yes
Price Range: $
Gauge: 5/32 | 25.2 rows/ 10 cm
Stitches Per Inch: 12.0 stitches / inch | 47.2 stitches/10 cm
Fiber System: Dynex SDЁ Nylon / DynexЁ Nylon
Dye Method: Solution Dyed / Yarn Dyed
Soil/Stain Protection: Ensure
Pattern Match: 3.91" W x 0.75" | 99.3 mm W x 19.1 mm L
Flooring Radiant Panel: ASTM E-648 Class I (Direct Gluedown)
Smoke Generation: Less than 450 (ASTM E-662)
Installation and Maintenance: Carpet is a textile fabric, subject to stretch and/or shrinkage. An acceptable pattern match is achievable, however, a perfect pattern match cannot be guaranteed. / To achieve best results, more time should be allowed to install patterned carpet. This style has a definite pattern and must be installed according to pattern match procedures as outlined in Tandus Centiva installation specifications / For best side match and seam appearances, it is recommended to run seams perpendicular to external light sources. / Proper maintenance is critical to the long term performance of any carpet and should be written into the specification of a project. / Recommendations are available from your Tandus Centiva Representative.