The Jazz PBL Flat End DI is one variation of a complete family of direct/indirect fluorescent luminaires. Constructed of perforated steel, it features uninterrupted, perfectly aligned continuous rows. The Jazz PBL Flat End DI series is furnished with a continuous fluorescent task down light. The Jazz PBL Flat End DI series can be furnished with a wide variety of perforated accent patterns in addition to the standard pattern. The standard pattern is two continuous perforated sections 5 wide on each side separated by a 3 parabolic louver in the center of the fixture. The perforations are 1/16 holes on 3/32 straight centers. Perforated corporate logos can also be supplied as a feature for reception areas and conference rooms. The computer designed optical system creates a widespread indirect distribution, while the variety of direct components provides useful contrast.
Housing: Two piece die formed 20-gauge cold rolled steel welded construction forming a 13 x 3 1/2 rounded profile. Continuous perforated sections are 1/16 x 3/32 straight centers with white .020 translucent overlay. Center section of fixture provides down task lighting. Finished end caps are 18-gauge cold rolled steel with no exposed hardware or knockouts. Special logo designs and perforated patterns are available. Dual mounting must be used when aircraft cable is installed for hanging.
Reflector: Die formed 20 gauge cold rolled steel minimum 90% reflectivity finished in high gloss baked white enamel. Die formed specular reflector is also available.
Electrical: Ballast is electronic, multivoltage 120/277, high power factor, thermally protected class P, sound rated A, with less than 10% total harmonic distortion. The minimum number of ballasts will be used unless otherwise specified.
Mounting: Standard Installation is an adjustable self-locking aircraft cable assembly 48 x 3/32 in diameter with 5 canopy. One 16/4 SJT straight 54 cord is supplied with each power feed. Standard pendants are available in 24 lengths. See Accessories for additional mounting.
Finish: Fixture housing and steel components are finished in baked white enamel applied over a five-stage pretreatment process.
Lamps: Fixtures are provided for use with two or three T8, T5 or T5 HO lamps for direct and indirect lighting. (Supplied by Others)
Certification: Luminaires are U. L. Listed, C. S. A. certified and are Union Made in the United States of America I.B.E.W.