The 35S10 D series is a direct version of the family of oval steel luminaires. The 35S10 D is designed with direct distribution for suspended or surface mounting. This series can be mounted individually, in perfectly aligned continuous rows, or in any of combination of patterns. This series is available with a variety of down light shielding. The 35S10 D series is an ideal solution for smaller spaces with lower ceiling heights.
Housing: Two piece die formed 20-gauge cold rolled steel welded construction forming a 3 1/2 x 10 oval profile. Finished end caps are laser cut 18-gauge cold rolled steel, with no exposed hardware or knockouts. Adjustable mounting brackets provide precision alignment of continuous rows.
Shielding: Parabolic louver is semi-specular low iridescence aluminum 1 1/4 x 4 O.C. with 12 cells per 4 section. Four spring clips secure snap in baffle including two tethers.
Reflector: Die formed 20-gauge cold rolled steel minimum 90% reflectivity finished in high gloss baked white enamel.
Electrical: Ballast is electronic, high power factor, thermally protected class P, sound rated A, with less than 20% total harmonic distortion. The minimum number of ballasts will be used unless otherwise specified.
Mounting: Standard installation is an adjustable self-locking aircraft cable assembly 48" x 3/32" in diameter with 5" canopy. One 16/4 SJT straight 54" cord is supplied with each power feed. Standard pendants are available in 24" lengths. See Accessories for additional mounting.
Finish: Fixture housing and steel components are finished in baked white enamel applied over a five-stage pretreatment process.
Lamps: Fixtures are provided for use with two or three 32 watt T8 lamps or 54 watt T5 HO lamps. (Supplied by Others)
Certification: Luminaires are U. L. Listed, C. S. A. certified and are Union Made in the United States of America. I.B.E.W.