New Barz™ is unlike any panel system you have seen before. Now you can preassemble any sizes and spacings of slats, struts, strips, boards, beams, and other linear components into ultra-lightweight panels that allow easy installation and accessibility. To minimize weight, we make Barz from light gage aluminum. We brake-form instead of roll-forming to assure that members are straight and have tight-fitting joints. They stay that way, too, because our wood finishes are not subject to twisting or warping that afflicts solid wood fabrications. Barz also provides outstanding acoustical control and integration with lighting and HVAC fixtures. Barz opens a truly new dimension in ceiling design.
Description:The Barz suspension system is ICC approved in accordance with International Building Code standards for Seismic Categories A, B, C, D, E, and F.
Panel Width:1’ to 3’
Panel Length:4’ to 10’
Access:Torsion spring system provides individual downward panel access.
-Light Weight:1.5 lbs per sf (approximate).
Interior/Exterior:Exterior utilizes additional fasteners for required load.
Finishes:Wide variety of wood and metal available.
-No VOC:No added formaldehyde.
Aluminum:Contains high recycled content.
Fire Class:The panels are made from a non-combustible aluminum core. A thin (less than .025 inches) layer of paint, film, or veneer finish is applied. Depending on the use and the type of wood selected, many of our panels can be used in Class A environments (IBC Chapter 8. Section 803). Most of our arboreal panels are also exempt from IBC Section 803.
NRC:.75 - .95.
Last Updated over 3 years
