Inside: 75" x 32" Outside: 82 3/4" x 32 1/2" Roughing-In: 83 1/4" x 33"
The unit is molded with an integral 15" seat . The seat is located at the head end and is 17" above the finished floor. Two soap / shampoo shelves shall be molded at each corner, 48" above the finished floor. The tub/shower module shall be pre-drilled for a valve and a hand-held shower head when factory supplies components. All units have slip-resistant floor treatment. The factory supplied components are to include two 50" stainless steel grab bars, one 25" stainless steel horizontal grab bar, integral seat and a stainless steel cutain rod. The unit is thermoformed from a solid color Lucite XL high gloss acrylic sheet into a one piece, totally seamless unit. This unit is reinforced on the back with a composite matrix which has a backside fire rating of "A" and a flame spread of 25.