Nominal Inside: 42" x 34" Outside: 43 1/2" x 35" Roughing-In: 44" x 35 1/2"
The unit is molded with a shampoo/soap shelf centered on the back wall. Shower modules shall be pre-drilled for a valve and a handheld shower head when factory supplies components. All units have an anti-skid floor treatment. Unit must be set in a mortar base, leveled and any clearances between the opening and the unit be filled with mortar. Shimming is necessary. It is recommended that a floor drain at or near the entrance to the shower be included. The factory supplied components are to include two stainless steel vertical grab bars, and a stainless steel curtain rod. The unit is thermoformed from continuous cast acrylic sheet into a one piece seamless unit. The unit is reinforced with a composite matrix. The unit has a backside fire rating of "A" and a flame spread of 25.