Glen Berman's Products

The Suburbanâ„¢/2 was developed in response to the need for a well-designed, high quality, moderately priced roller shade for commercial or residential shades. The Suburbanâ„¢/...

Single Cord Manual Bottom/Up Shade and Two Tube Mecho/5 Manual Bottom/Up Shade....

DualShadesâ„¢ are flat roller shades with an insulated transparent lining for a technically advanced system combining insulation, extra view, and heat control. The ThermoVeilâ„...

...

Fixed Shades are non-retracting shades that are custom fitted to the architectural details of the window. They can also be used as a creative attention getting corporate identi...

Electro®/1 and Electro®/2 are available in Standard , Extended, and DoubleShade® bracket models with a 50mm tubular motor and the new Altus RTS motor for wireless switch c...

Electro®/3 is ideal for smaller conditions which can show up anywhere including conference rooms, offices, cafes and boutiques, hospitals and residences. Electro®/3 is avai...

The standard tubular motor has been utilized in ElectroShades® for over 25 years. The motors include: • A single four-conductor wire • 110/220 volt, 1.5 – 3 amps • C...

One or two ElectroShades® can be wired to a Double Pole Double Throw (DPDT), 3-position rocker or paddle switch. This type of switch allows up to 2 motors to be kept isolated....

Designed primarily for group control with a 3-position toggle switch. Up to 4 motors can be wired to each MLC . MLC’s can be daisy chained for virtually unlimited number of ...

A micro-processor based controller, specializing in multi-level control and uniformity. The IQ/MLC™ overcomes the problem of varying RPM ’s of standard tubular motors and ...

Solar Activated Controller SAC Unit with Photo Cell and Auto/Manual Switch: Provides full up or full down operation of a shade or group of shades based on solar load. The ...

RTS for addressable local and master wireless remote control with one intermediate stop position. The RTS â„¢ system utilizes special motors with a built in antenna that allo...

A motorized shade designed for applications that require a taught flat shade. The system consists of two synchronized tubular motors and a special electronic control unit to co...

A single tubular motor and spring system for angled, gravity drop or horizontal shades up to 6×8 ft (183×245 cm). As the motor in the cable take up tube pulls the sha...

This system has only a cable take up tube with tubular motor and a fixed pleat at the head rail. The cable take up tube raises the shade by lifting the drive cables attached to...

Consists of two cable take up tubes, one for each direction of travel, each with its own motor and drive cable and a fixed pleat at the head rail. A separate set of Spacer Cabl...

Side Channels are recommended when conditions require minimizing the light leak around the shade cloth. Ideal for A/V centers, training facilities and laboratories. Can be used...

...

Guide Cables and Guide Track are used depending on the size of the shade and/or site conditions. For example, Guide Cables are used to support a shade when there is no space be...