Supplier Info
Rick Barnett
Dur O Wall
TN
Dur O Wall
TN
Product Description
BRAND
DS Concrete Accessories
PRODUCT NO.
A-30
DESCRIPTION
Dayton Superior A-30 Breakback Wrench is designed to break off the snap tie ends after the formwork has been stripped.
SPECIAL NOTES
General Tie Breaking Information:
1. For best results, ties should be broken off in two to five days after concrete placement.
2. Attempting to break a tie in "green" concrete may result in the tie rotating in the concrete. This makes it very difficult to break the tie with conventional methods.
3. For proper breakback, make sure that the spreader cone or washer is loose and the tie bead, which is located directly behind the washer, is free of the concrete.
4. When a tie will not break back or a spreader cone or washer is embedded in the concrete, use a hammer and screw driver to chip away the concrete to free the embedded part. Failure to follow this practice may result in the tie breaking near the face of the concrete instead at the proper breakback point.
DS Concrete Accessories
PRODUCT NO.
A-30
DESCRIPTION
Dayton Superior A-30 Breakback Wrench is designed to break off the snap tie ends after the formwork has been stripped.
SPECIAL NOTES
General Tie Breaking Information:
1. For best results, ties should be broken off in two to five days after concrete placement.
2. Attempting to break a tie in "green" concrete may result in the tie rotating in the concrete. This makes it very difficult to break the tie with conventional methods.
3. For proper breakback, make sure that the spreader cone or washer is loose and the tie bead, which is located directly behind the washer, is free of the concrete.
4. When a tie will not break back or a spreader cone or washer is embedded in the concrete, use a hammer and screw driver to chip away the concrete to free the embedded part. Failure to follow this practice may result in the tie breaking near the face of the concrete instead at the proper breakback point.
