Supplier Info
Rick Barnett
Dur O Wall
TN
Dur O Wall
TN
Product Description
BRAND
Dur-O-Wal
PRODUCT NO.
DA1002 and DA1003
DESCRIPTION
Askew head bolts are made with the head at a slope to match the wedge-shaped tracks of the shelf angle insert. The bolts must be placed into the insert properly so the head of the bolt has full bearing on the insert. Care must be taken to insure that the bolt is not installed upside down. Askew head bolts are available in 3/4” diameter x 1-1/2”, 2”, 2-1/2” and 3” lengths. Ultimate shear capacity is 9,060 lbs. Always tighten the hex nut to a “snug tight” condition only. “Snug tight” is defined as the tightness attained to ensure that the parts of the material are in full contact with each other, plus 1/2 turn with a 12” long wrench. Careless wrench tightening or turn-of-nut tightening can induce tension loads into the insert that are in excess of the design capacity and should be avoided.
Dur-O-Wal
PRODUCT NO.
DA1002 and DA1003
DESCRIPTION
Askew head bolts are made with the head at a slope to match the wedge-shaped tracks of the shelf angle insert. The bolts must be placed into the insert properly so the head of the bolt has full bearing on the insert. Care must be taken to insure that the bolt is not installed upside down. Askew head bolts are available in 3/4” diameter x 1-1/2”, 2”, 2-1/2” and 3” lengths. Ultimate shear capacity is 9,060 lbs. Always tighten the hex nut to a “snug tight” condition only. “Snug tight” is defined as the tightness attained to ensure that the parts of the material are in full contact with each other, plus 1/2 turn with a 12” long wrench. Careless wrench tightening or turn-of-nut tightening can induce tension loads into the insert that are in excess of the design capacity and should be avoided.
